|
Model 8M
Distilled Capacity: 8.0 US gal.
(30.0 L)/24 hrs*
Optional Holding Tank
Capacity: 3.0 US gal.
(11.0 L)
Shipping Weight: 30.0lbs.
(13.5kg) |
PWS 8-M
SPECIFICATIONS
Height 131/2” 34.3cm
Depth 105/8”
27.0cm
Width 171/4”
43.8cm
Weight 24lb 11.0kg
Volts
Amps Hertz
Watts
120v
9.2
60 1100
220v
5.0 50/60
1100 |
|
UNIQUE FEATURES
MODEL 8-M WATER DISTILLER:
When manually filled, this distiller will
distill approximately one gallon of pure water then automatically
shut off.
Designed with the largest lid opening in the
industry and a ‘V’ bottom boiler, your distiller is easier to
maintain. The Model PWS 8-M Distiller has high quality power and fan
switches as well as a float switch that shuts the distiller off when
the water level is low.
The raw or tap water is heated up and brought
to a boil and the pure steam rises. The steam enters a baffle system
that directs the steam towards the cooling coil. As the steam enters
the cooling coil, a gas vent releases any volatile gases from the
coil. |
Distillation & the
Hydrologic Cycle:
Mother nature and the Sun evaporated moisture
from ocean water on the earth and collect the moisture in the clouds
as pure rainwater. A Precision Pure Water Distiller duplicates the
hydrologic cycle inside an appliance.
- Tap water is poured into the top of the
distiller and filled to the water level pin.
- The heating element heats the water and
brings to a boil.
- As the steam leaves the boiler, it is
channeled through a full length baffle system. It then goes past
a gas release vent and enters the cooling coil to be cooled into
pure steam distilled water.
- As the water exits the cooling coil, it
goes through a post carbon filter and into your storage
container or optional storage tank.
- When finished the unit turns itself off
automatically.
|
